Make Your Own Ice Shack! Free PlansIf you follow these basic plans, you'll end up with a sturdy, functional ice fishing shack. Adding ski supports, you could use an old pair of snow ski's or 2" x 4"/ 2" x 6" runners, allows it to be pulled behind a snowmobile or ATV.
The first step is to place a 40" x 84" piece of 5/8" plywood on the
floor. On one end of the plywood, screw down a 2" x 4" x 40". The
back panel of the hut is fastened to this 2" x 4", to enable the front
panel to lay flat with the back panel on top of it (see diagrams A and B). If you are adding skis, put them on now with 2" or 3" wood screws.
read more.... http://www.wisconsinoutdoor.com/iceshackplans.htm
